Solid Wood Floor Fitting in W8

Project Overview

This case study covers fitting Solid Wood across the living areas at a Edwardian semi-detached in Kensington, W8 7SU. The property owner had been researching local flooring contractors and contacted us after reviewing our portfolio of completed work across Kensington. The total floor area came to approximately 84 square metres, covering the living areas.

We carry out flooring work across Kensington and the wider London area throughout the year. Jobs like this one in Kensington are representative of the residential projects we complete on a regular basis — properties with floors that deserve a proper professional finish rather than a quick patch-up or cover-over.

Initial Assessment

Before starting any work, we carried out a detailed survey of the floor condition. On arriving at this Kensington property, our surveyor found the floors with existing laminate to lift and dispose of. The boards were checked for movement and structural soundness, moisture levels were measured at multiple points, and all relevant findings were discussed with the client and documented in the job specification. Thorough preparation at this stage prevents problems later — it is one of the areas where an experienced contractor earns their fees.

On this occasion the preparatory work formed a meaningful proportion of the overall project time. Getting the substrate right before any finishing or fitting begins is not optional — it is the foundation everything else depends on.

Work Carried Out

Our fitting team worked to a schedule agreed with the client before the job started. The subfloor was assessed on day one — high spots ground back, low spots levelled with floor-grade compound — then the Solid Wood was acclimatised to the property before installation. All perimeter gaps were set to allow for seasonal movement and covered with matching beading. Thresholds and door profiles were cut on site and fitted as part of the job, leaving a clean finish throughout.

• Furniture Moving
• Hardwood - Sand, Buff & Lacquer
• Stairs - Sand & Seal
• Thresholds & Fitting (inc. materials)
• Solid Oak Scotia Beading, Lacquered, 19x19 mm, 2.0 m

Materials and Finish

The Solid Wood was selected by the client prior to the survey visit. We provided samples and technical data sheets at the survey stage so the client could see exactly what to expect before committing. Supply and fit costs in London typically run from £35 to £70 per square metre, depending on the product, subfloor preparation required and any pattern work such as herringbone or chevron laying.

The Result

The completed floor was inspected by the client on handover with no punch-list items raised. The Solid Wood sits flat and true throughout, with consistent expansion gaps at all walls and tight board-to-board joints. The job finished on time and within the agreed budget.

Total project duration was three to four days. If you have a similar project planned in Kensington or elsewhere across Kensington, we would be glad to arrange a free survey and written quotation. We typically respond within one working day and can usually schedule a site visit within the week.

Frequently Asked Questions

How long does floor fitting take for a typical house?

For a project of this scale in Kensington — roughly 84 square metres across 1 rooms — we typically allow three to four days. Timing depends on floor condition, room access and the finish or product specified. We provide a firm schedule at the quotation stage and stick to it.

Do you work across Kensington and nearby postcodes?

Yes. We cover Kensington as part of our Kensington service area. We work across the full London postcode range and into parts of the Home Counties, including the postcodes surrounding Kensington. Contact us for a free, no-obligation quotation and we will confirm availability at your property.

What preparation is needed before the team arrives?

We ask that rooms are cleared of furniture and that any fragile or valuable items are removed from adjacent areas. We install dust barriers at doorways and protect staircases and adjoining rooms as standard. For fitting jobs the property should be fully plastered and dried out, with heating running for at least two weeks before the floor goes in.

What does fitting Solid Wood typically cost in Kensington?

Supply and fit costs in London typically run from £35 to £70 per square metre, depending on the product, subfloor preparation required and any pattern work such as herringbone or chevron laying. For a precise figure based on your specific floor, area size and requirements, get in touch and we will carry out a free survey and provide a written, no-obligation quote.